News

Not every battery calorimeter can handle a jump from an 18650 cell to a full EV module. This guide breaks down chamber size, sample fixtures, and thermal runaway data needs so you pick a system that actually fits your cell formats — not just your budget.

Electrolyte thermal stability testing helps formulation and battery teams identify exothermic reactions, onset temperatures, heat release, and compatibility risks before scale-up. This practical guide explains how DSC, pressure DSC, TGA, and complementary calorimetry support safer electrolyte selection, separator and electrode compatibility, storage limits, and process safety decisions.

Impact sensitivity testing evaluates how energetic materials respond to controlled mechanical impact. Learn how the BAM drop hammer works, how limiting impact energy is determined and which factors influence test repeatability.

Learn how the BAM friction test evaluates the friction sensitivity of energetic materials. This guide covers the test principle, porcelain plate and peg apparatus, UN Test 3(b)(i) procedure, limiting-load interpretation, influencing factors and BAM friction tester selection.

Learn how the 20L sphere determines Kst, Pmax, and MIE for industrial powder hazard classification. Accurate dust explosion data for process safety compliance.

This article explains ASTM C518 testing for insulation materials, including the Heat Flow Meter Method, thermal conductivity calculation, related standards, key applications, and the differences between ASTM C518 and ASTM C177.

Combustible dust testing helps identify ignition sensitivity and explosion severity through key parameters such as MIE, MIT, LIT, MEC, LOC, Pmax and Kst. This article explains the difference between dust clouds and dust layers, introduces core testing equipment, and shows how test data supports explosion protection design, inerting systems and safer production operations.

Dust Hazards Analysis (DHA) is a systematic method for identifying, analyzing, and managing combustible dust fire and explosion risks in industrial facilities. This article explains the three key steps of DHA, including hazard identification, combustible dust testing data collection, hazard analysis, and risk management measures such as ignition source control, inerting, explosion venting, and suppression systems.

Zeal Instruments is committed to protecting your privacy. This privacy statement sets out how we use and protect any personal … Read more

If you work with flammable substances, it is crucial to know their flammable limits. The lower flammable limit (LFL) and … Read more